LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 914 (Steering Wheel & Steering Column) >> Repair Instructions >> Intermediate Steering Shaft Replacement - Upper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the steering wheel so that the front wheels are pointing straight ahead.
  2. Turn the ignition switch to the LOCK position and remove the key.

    Note the relationship of the upper intermediate shaft to the lower intermediate shaft and the upper intermediate shaft to the steering column in order to ensure proper installation.

  3. Remove the steering column. Refer to STEERING COLUMN REPLACEMENT .
  4. Remove the nut and the bolt that retain the upper intermediate shaft to the steering column.
  5. Remove the upper intermediate shaft from the steering column.
Fig 1: Removing Upper Intermediate Shaft From Steering Column
G01467408Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals