LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 912 (Power Steering System) >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - Off Vehicle (CB Series) >> Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the connector and fitting assembly (4).
  2. Remove the O-ring seal (3).
    Fig 1: Connector & O-Ring Seal
    G01467173Courtesy of GENERAL MOTORS CORP.
  3. Remove the control valve assembly (3) and the flow control spring (2) from the pump housing assembly (1).
Fig 2: Removing Control Valve Assembly & Flow Control Spring From Pump Housing Assembly
G01467174Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals