LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 901 (Rear Drive Axle) >> Repair Instructions >> Gear Tooth Contact Pattern Inspection >> Drive Side Toe - Coast Side Toe Contact Pattern >> Correction

Drive Side Toe - Coast Side Toe Contact Pattern: Correction

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

Increase the backlash. Move the ring gear away from the pinion by adjusting the side bearing shim thickness or the adjuster sleeve(s). Refer to BACKLASH ADJUSTMENT  .

Fig 1: Drive Side Toe - Coast Side Toe Contact Pattern
G01468184Courtesy of GENERAL MOTORS CORP.