Tools Required
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- J 5590 Rear Pinion Bearing Race Installer (7.6 inch axle)
- J 7817 Outer Bearing Race Installer (7.6 inch axle)
- J 8092 Driver Handle
- J 8608 Rear Pinion Bearing Race Installer (1st design 8.6 inch axle)
- J 8611-01 Rear Pinion Bearing Race Installer (8.6 inch axle)
- J 22912-01 Split Plate Bearing Puller
- J 24433 Pinion Cone and Side Bearing Installer (8.6 inch axle)
- J 29609 Rear Pinion Bearing Cup Installer (7.6 inch axle)
- J 45870 Pinion Bearing Cup Installer (2nd design 8.6 inch axle)
- J 45871 Pinion Bearing Remover