LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 900 (Front Drive Axle - 4WD) >> Repair Instructions >> Gear Tooth Contact Pattern Inspection >> Drive Side Heel - Coast Side Heel Contact Pattern >> Correction

Drive Side Heel - Coast Side Heel Contact Pattern: Correction

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

Decrease the backlash. Move the ring gear closer to the drive pinion by adjusting the side bearing adjuster sleeves. Refer to BACKLASH INSPECTION AND ADJUSTMENT  .

Fig 1: Identifying Drive Side Heel-Coast Side Heel Contact Pattern
G01468075Courtesy of GENERAL MOTORS CORP.