LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 899 (Propeller Shaft And Universal Joints) >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Center Bearing Support Bolts 70 N.m 50 lb ft
Front Propeller Shaft Yoke Retainer Bolts 20 N.m 15 lb ft
Rear Pinion Yoke Retainer Bolts (Single Universal Joint Type) 20 N.m 15 lb ft
Rear Pinion Flange Bolts (Double Cardan Joint Type) 45 N.m 33 lb ft