LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 896 (Vibration Symptoms Diagnosis And Correction) >> Diagnostic Information & Procedures >> Diagnostic Starting Point - Vibration Diagnosis & Correction

Diagnostic Starting Point - Vibration Diagnosis & Correction

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Important:  The following steps must be completed before using the analysis tables or the symptom tables.

  1. Perform the Vibration Analysis - Road Testing table before using the other Vibration Analysis tables or the Symptom tables in order to effectively diagnose the customer's concern. See Vibration Analysis - Road Testing  . The use of Vibration Analysis - Road Testing will first provide duplication of virtually any vibration concern and then identify the correct procedure for diagnosing the area of concern which has been duplicated.
  2. Review the following Vibration Diagnostic Process.
  3. Review the general descriptions to familiarize yourself with vibration theory and terminology, the J 38792-A, Electronic Vibration Analyzer (EVA) 2 and the J 38792-VS, Vibrate Software. Reviewing this information will help you determine whether the condition described by the customer is a potential operating characteristic or not. Refer to the following:
scientia non olet · About LEMON Manuals