LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 893 (Entertainment System) >> Repair Instructions >> Audio Control Replacement - Second Seat (Rendezvous) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the second seat audio control into the rear console trim plate.
  2. Connect the electrical connectors to the audio control
    Fig 1: Connecting Electrical Connectors To Audio Control
    G01517499Courtesy of GENERAL MOTORS CORP.
  3. Press the trim plate onto the center console.
    Fig 2: Installing Trim Plate Onto Center Console
    G01517500Courtesy of GENERAL MOTORS CORP.
  4. Install 2 screws that secure the rear console trim plate.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  5. Close the front armrest.
    Fig 3: Installing Rear Console Trim Plate Screws
    G01517501Courtesy of GENERAL MOTORS CORP.