Radio Setup
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Important: The Radio Setup option does not contain a sub-menu. Radio Setup will configure the following systems:
- Steering wheel controls
- Learn VIN
- DTCs
- Class 2 radio messages
The radio setup procedure will also clear the following messages:
- CAL
- CAL ERROR
- CALIBRATE
To properly setup the DE 100 series radio, complete the following procedure using a scan tool.
- At the Main Menu screen, select DIAGNOSTICS.
- At the Vehicle Identification screen, select the following options:
- 2001 Model Year
- B Platform
- At the System Selection Menu screen, select BODY.
- At the Body screen, select RADIO.
- At the Radio screen, select SPECIAL FUNCTIONS.
- At the Special Functions screen, select RADIO SETUP.
- At the Radio Setup screen, select ENTER.
- After the scan tool displays TEST COMPLETED SUCCESSFULLY, press EXIT.
- Cycle the ignition.
Without learning the VIN, the radio will display a locked message (LOC).