Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Using a small, flat-bladed tool, remove the cover of the coat hook access hole from the roof side rail lamp.
Using a small, flat-bladed tool, remove the cover from the lamp.
Remove the screws from the lamp.

Fig 1: Roof Side Rail Lamp Removal (1 Of 2)
Courtesy of GENERAL MOTORS CORP.
Remove the lamp from the roof.
Disconnect the electrical connectors from the lamp.

Fig 2: Roof Side Rail Lamp Removal (2 Of 2)
Courtesy of GENERAL MOTORS CORP.