LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 892 (Lighting Systems) >> Repair Instructions >> High Mounted Stop Lamp Replacement (Rendezvous) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the high mounted stop lamp to the roof panel.
  2. Connect the electrical to the high mounted stop lamp.
  3. Install the high mounted stop lamp screws to the high mounted stop lamp.

    Tighten 

    Tighten the high mounted stop lamp screws to 2 N.m (18 lb in).

Fig 1: High Mounted Stop Lamp Installation - Rendezvous
G01515524Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals