LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 890 (Sunroof System) >> Repair Instructions >> Luggage Carrier Rivnut Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a 10 mm (0.3937 in) drill bit, drill the rivnut hex shape hole in the roof out to a round 10 mm hole.
  2. Install a replacement rivnut to the hole in roof using a rivnut tool, or equivalent.
  3. Install the luggage carrier. Refer to LUGGAGE CARRIER REPLACEMENT  .
    Fig 1: Installing Luggage Carrier Rivnut
    G01516280Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals