LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Automatic Transmission - Servicing - Except ALLISON) >> Removal & Installation >> Filler Tube (4L60-E) >> Installation

Filler Tube (4L60-E): Installation

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, and 2002 GMC C3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new filler tube seal into the transmission case. Install the filler tube into the seal. See Fig 1.
  2. Install the bolt securing the filler tube bracket to the transmission and tighten to Specification. See TORQUE SPECIFICATIONS .
  3. Install the bolt securing the filler tube bracket to the engine and tighten to specification See TORQUE SPECIFICATIONS .
  4. Lower the vehicle. Install the transmission fluid level indicator. Fill transmission with appropriate fluid to proper level. See LUBRICATION .
Fig 1: Removing & Installing Filler Tube
G00096144Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals