LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Automatic Transmission - Servicing - Except ALLISON) >> Removal & Installation >> Extension Housing Rear Oil Seal (4L60-E) >> Installation

Extension Housing Rear Oil Seal (4L60-E): Installation

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, and 2002 GMC C3500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Install the new seal using rear extension seal installer and a soft faced mallet. See Fig 2. Install the propeller shaft. See REMOVAL & INSTALLATION in appropriate DRIVE SHAFTS & UNIVERSAL JOINTS article in DRIVE AXLES. Lower the vehicle. Fill transmission with appropriate fluid to proper level. See LUBRICATION .

Fig 1: Removing Rear Extension Housing Seal
G00088371Courtesy of GENERAL MOTORS CORP.
Fig 2: Installing Rear Extension Housing Rear Oil Seal
G00088372Courtesy of GENERAL MOTORS CORP.