LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 888 (Body Rear End) >> Repair Instructions >> Wedge Replacement - Lift Gate Body Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate.
  2. Mark the location of the liftgate wedge on the liftgate spacer.
  3. Remove the screw from the liftgate wedge.
  4. Slide the liftgate wedge rearward to remove it from the liftgate wedge spacer.
  5. Using a flat bladed tool, remove the liftgate wedge spacer from the body.
scientia non olet · About LEMON Manuals