LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 888 (Body Rear End) >> Repair Instructions >> Wedge Replacement - Lift Gate Body Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the liftgate wedge spacer to the body.
  2. Position the liftgate wedge to the liftgate wedge spacer and slide it forward to the marked location.
  3. Install the liftgate wedge screw.

    Tighten the screw to 10 N.m (89 lb in).

  4. Close the liftgate.
scientia non olet · About LEMON Manuals