LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 885 (Interior Trim) >> Repair Instructions >> Assist Handle And Rear Coat Hook Replacement (Aztek) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rotate the assist handle downward.
  2. Remove the fasteners (1) from the handle assembly.
  3. Remove the bulb socket assembly from the lamp assembly.
  4. Disconnect the electrical connectors.
  5. Remove the assist handle assembly.
    Fig 1: Removing Procedure Of Assist Handle And Rear Coat Hook (Aztek)
    G01518299Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals