LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 882 (Wiper System & Washer System) >> Repair Instructions >> Wiper Arm Blade Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the hook of the rear wiper arm through the opening in the rear wiper blade.
    Fig 1: Installing Rear Wiper Arm To Rear Wiper Blade
    G01517373Courtesy of GENERAL MOTORS CORP.
  2. Position the rear wiper blade pivot in the inside radius of the rear wiper arm hook.
  3. Press the rear wiper blade pivot into the rear wiper arm hook until the pivot locks into the hook.
    Fig 2: Pressing Rear Wiper Blade Pivot Into Rear Wiper Arm Hook
    G01517374Courtesy of GENERAL MOTORS CORP.