LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 881 (Seat System) >> Repair Instructions >> Seat Cushion Replacement - Rear (Split Bench) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear seat cushion to the rear seat frame.
  2. Install the rear seat cushion cover to the rear seat cushion. Refer to SEAT CUSHION COVER REPLACEMENT - REAR (BUCKET)  or SEAT CUSHION COVER REPLACEMENT - REAR (SPLIT BENCH)  .
  3. Install the rear seat back. Refer to SEAT BACK REPLACEMENT - REAR (SPLIT BENCH)  or SEAT BACK REPLACEMENT - REAR (BUCKET)  .
  4. Install the rear split bench seat to the vehicle. Refer to SEAT REPLACEMENT - REAR 50-50 SPLIT  .
    Fig 1: Installing Rear Seat Cushion To Rear Seat Frame
    G01518174Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals