LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 881 (Seat System) >> Repair Instructions >> Seat Cushion Frame Replacement - Rear (Bucket) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear seat cushion to the rear seat cushion frame. Refer to SEAT CUSHION REPLACEMENT - REAR (BUCKET)  or SEAT CUSHION REPLACEMENT - REAR (SPLIT BENCH)  .
  2. Install the rear seat cushion cover to the rear seat cushion. Refer to SEAT CUSHION COVER REPLACEMENT - REAR (BUCKET)  or SEAT CUSHION COVER REPLACEMENT - REAR (SPLIT BENCH)  .
  3. Install the rear seat back to the rear seat. Refer to SEAT BACK REPLACEMENT - REAR (SPLIT BENCH)  or SEAT BACK REPLACEMENT - REAR (BUCKET)  .
  4. Install the rear seat adjuster. Refer to SEAT ADJUSTER REPLACEMENT - REAR (SPLIT BENCH)  .
  5. Install the rear bucket seat to the vehicle. Refer to SEAT REPLACEMENT - REAR BUCKET  .
    Fig 1: Installing Seat Cushion Frame - Rear (Bucket)
    G01518204Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals