LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 881 (Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Rear (Bucket) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear seat back pad to the rear seat back frame. Refer to SEAT BACK PAD REPLACEMENT - REAR (BUCKET)  or SEAT BACK PAD REPLACEMENT - REAR (SPLIT BENCH)  .
  2. Install the rear seat back cushion cover. Refer to SEAT BACK COVER REPLACEMENT - REAR (BUCKET)  or SEAT BACK COVER REPLACEMENT - REAR (SPLIT BENCH)  .
  3. Install the rear seat back. Refer to SEAT BACK REPLACEMENT - REAR (SPLIT BENCH)  or SEAT BACK REPLACEMENT - REAR (BUCKET)  .
  4. Install the rear seat. Refer to SEAT REPLACEMENT - REAR BUCKET  .
    Fig 1: Installing Seat Back Frame - Rear (Bucket)
    G01518228Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals