LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 881 (Seat System) >> Repair Instructions >> Memory Seat Switch Replacement (Rendezvous) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connectors to the memory seat switch panel
  2. Install the memory seat switch panel to the door trim panel and press into place until fully seated.
    Fig 1: Connecting Electrical Connectors To Memory Seat Switch Panel
    G01518113Courtesy of GENERAL MOTORS CORP.