LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 880 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Trim Plate Replacement - Front Floor Console (Aztek). >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear cup holder liner and remove the screw.
  2. Pull up on the trim plate to release the retainer clips.
  3. Lift the trim plate and turn sideways in order to lift the trim plate over the transaxle shift lever.
  4. Remove the trim plate from the front floor console.
    Fig 1: Removing Trim Plate From Front Floor Console
    G01517806Courtesy of GENERAL MOTORS CORP.