LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 880 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Trim Plate Replacement - Console Rear (Rendezvous). >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the armrest.
  2. Remove the two screws that hold the trim plate.
    Fig 1: Removing Screws That Hold Trim Plate
    G01517788Courtesy of GENERAL MOTORS CORP.
  3. Pull on the trim plate to release the clips.
  4. Disconnect the trim plate electrical connections.
  5. Remove the trim plate.
    Fig 2: Removing Trim Plate
    G01517789Courtesy of GENERAL MOTORS CORP.