LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 880 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Handle Replacement - Instrument Panel (I/P) Compartment (Rendezvous) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the door handle into the I/P compartment door.
  2. Install and fully seat the retainer to the door handle.
  3. Connect the door latch rod to the door handle. Lower the door latch into position on the door.
    Fig 1: Connecting Door Latch Rod To Door Handle
    G01517722Courtesy of GENERAL MOTORS CORP.
  4. Align the door handle and the latch cover to the I/P compartment door. Carefully press the cover into place to secure the retaining tabs.
  5. Close the I/P compartment door.
    Fig 2: Pressing Cover Into Place To Secure Retaining Tabs
    G01517723Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals