LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Automatic Transmission Servicing) >> Removal & Installation >> Pressure Control Solenoid (4T65-E) >> Installation

Pressure Control Solenoid (4T65-E): Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

Install new O-ring seals (307, 316) onto the pressure control solenoid valve (322), if they had been removed. See Figure . Install the pressure control solenoid (322). Hold the PC solenoid valve (322) in the control valve body (301). Install the pressure control solenoid valve retainer (314E) into the control valve body (301). Connect the transaxle wiring harness. Install the case side cover. See CASE SIDE COVER (4T65-E)  .

scientia non olet · About LEMON Manuals