LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Automatic Transmission Servicing) >> Removal & Installation >> Manual Shaft & Seal (4T80-E) >> Installation

Manual Shaft & Seal (4T80-E): Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.

Install the manual shaft seal (20). See Figure . Install the manual shaft (16) through the top of the bell housing. Install the detent lever and roller assembly. See DETENT LEVER & ROLLER ASSEMBLY (4T80-E)  . Install the manual shaft nut by hand. Tighten the manual shaft lever nut to specification. See TORQUE SPECIFICATIONS  .

scientia non olet · About LEMON Manuals