LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 878 (Battery, Charging System & Starting System) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the battery tray.
  2. Install the battery tray bolts.

    Tighten 

    Tighten the battery tray bolts to 10 N.m (89 lb in).

  3. Install the battery. Refer to BATTERY REPLACEMENT  .
    Fig 1: Installing Battery Tray Bolts And Tray
    G01501070Courtesy of GENERAL MOTORS CORP.