LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 874 (Automatic Transaxle Diagnosis, Service & Repair - 4T65-E) >> Repair Instructions >> Automatic Transmission Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transaxle mount bracket. Refer to AUTOMATIC TRANSMISSION MOUNT BRACKET REPLACEMENT  .
  2. Remove the transaxle mount lower nuts to the transaxle mount frame bracket.
  3. Remove the transaxle mount from the transaxle mount frame bracket.
    Fig 1: Removing Transaxle Mount From Transaxle Mount Frame Bracket
    G01502049Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals