LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 866 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Sealing Washer Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seal washer from the A/C refrigerant component.
  2. Inspect the seal washer for any signs of damage.
  3. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.

    Important:  DO NOT reuse sealing washer.

  4. Discard the sealing washer.
    Fig 1: Removing Procedure Sealing Washer
    G01498816Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals