Removal Procedure
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Place the rear window in the full down position.
- Remove the trim panel. Refer to TRIM PANEL REPLACEMENT - SIDE REAR DOOR (AZTEK) or TRIM PANEL REPLACEMENT - SIDE REAR DOOR (RENDEZVOUS) .
- Remove the water deflector. Refer to WATER DEFLECTOR REPLACEMENT - REAR DOOR .
- Remove the outer belt sealing strip. Refer to SEALING STRIP REPLACEMENT - REAR DOOR WINDOW BELT OUTER .
- Remove the screw from the rear window channel.
- Remove the channel from the rear door.