LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 863 (Door System, Mirror System & Window System) >> Repair Instructions >> Sealing Strip Replacement - Front Door Window Belt Outer >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the outside rearview mirror. Refer to MIRROR REPLACEMENT - POWER  .
  2. Remove the rear screw from the front door outer belt sealing strip.
  3. Remove the outer belt sealing strip by pulling the sealing strip from the front door pinchweld flange.
    Fig 1: Removing Front Door Window Belt Outer Sealing Strip
    G01516172Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals