LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 862 (Steering Wheel & Steering Column) >> Repair Instructions >> Park Pawl Actuator Replacement (Aztek) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector.
  2. Install the park pawl actuator by rotating clockwise.
  3. Install the tie straps onto the park pawl actuator harness.
  4. Install the steering column trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT  .
    Fig 1: Installing Park Pawl Actuator
    G01499432Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals