LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Automatic Transmission - Servicing - ALLISON) >> Removal & Installation >> Oil Cooler Fitting >> Removal

Oil Cooler Fitting: Removal

WARNING: This page is about a different car, the 2002 GMC Sierra and 2002 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the hose from the hydraulic connector assembly being replaced. Remove the hydraulic connector assembly (1) and/or (2). See Figure .

scientia non olet · About LEMON Manuals