Manual Detent Spring & Roller: Installation
WARNING: This page is about a different car, the 2002 GMC Sierra and 2002 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Install the detent spring assembly (2) onto the control valve assembly. Confirm the roller of the detent spring assembly rests on the detent lever (1). See Figure . Install 2 detent spring bolts (3). Tighten the bolts to specification. See TORQUE SPECIFICATIONS . Install the oil pan and suction filter. See INTERNAL FILTER REPLACEMENT under LUBRICATION.