LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Automatic Transmission - Servicing - ALLISON) >> Removal & Installation >> Heat Shield >> Installation

Heat Shield: Installation

WARNING: This page is about a different car, the 2002 GMC Sierra and 2002 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the side heat shield (3) to the transmission. See Fig 1 .
  2. Install the bolt (4) and the nut (5) to the side heat shield (3). See Fig 1 .
  3. Tighten the bolt (4) and the nut (5) to specification. See TORQUE SPECIFICATIONS  .
  4. Install the front heat shield (1) to the transmission. Install the bolts (2) to the front heat shield (1). See Fig 1 . Tighten the bolts to specification. See TORQUE SPECIFICATIONS  . Lower the vehicle.
Fig 1: Removing & Installing Heat Shields
G00096139Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals