LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 856 (Power Steering System) >> Repair Instructions >> Power Steering Pulley Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power steering pump from the engine for clearance. Refer to POWER STEERING PUMP REPLACEMENT  .
  2. Use the J 25034-C  in order to remove the pump pulley.
    Fig 1: Removing Power Steering Pump Pulley
    G01499324Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals