LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 855 (Engine Mechanical - 4.8L, 5.3L & 6.0L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Sight Shield Replacement (4.8L, 5.3L, and 6.0L (RPO LQ4)) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the intake manifold sight shield bolt.
  2. Remove the sight shield from the sight shield retainer.
    Fig 1: Removing Sight Shield From Sight Shield Retainer
    G02116320Courtesy of GENERAL MOTORS CORP.
  3. Remove the sight shield retainer bolts and the retainer, if required.
    Fig 2: Removing Sight Shield Retainer Bolts & Retainer
    G02116321Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals