LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 850 (Suspension Control System - Suspension Damping) >> Repair Instructions >> Front Position Sensor Link Assembly Replacement-Electronic Suspension >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the J 38185  install to link rod to the ball stud on the sensor lever and the mounting bracket.
  2. Install the ESC sensor to the vehicle. Refer to FRONT POSITION SENSOR REPLACEMENT-ELECTRONIC SUSPENSION (15 SERIES)  or FRONT POSITION SENSOR REPLACEMENT-ELECTRONIC SUSPENSION (25 SERIES 2WD)  or FRONT POSITION SENSOR REPLACEMENT-ELECTRONIC SUSPENSION (25 SERIES 4WD)  .