LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 847 (Front Suspension System) >> Repair Instructions >> Lower Ball Joint Replacement (Coil Spring Suspension) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Remove the tire and wheel assembly. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in Tires and Wheels.
  3. Remove the lower control arm. Refer to LOWER CONTROL ARM REPLACEMENT  .
  4. Secure the lower control arm in a bench vice or equivalent.
  5. Center punch the rivet heads.
  6. Drill out the rivets.
  7. Remove the lower ball joint.
scientia non olet · About LEMON Manuals