Auxiliary HVAC Control Processor

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The auxiliary HVAC control processor controls all outputs for the auxiliary HVAC system. It receives inputs from the front and rear auxiliary HVAC control assemblies. The processor positions the auxiliary air temperature actuator and auxiliary mode actuator based on these inputs. This processor does not have Class 2 communication available.

The auxiliary HVAC control processor receives power from the ignition 3 voltage circuit. Ground is provided by the ground circuit through rear auxiliary HVAC control assembly and a splice pack. The system receives 12 volt varied voltage input for auxiliary air temperature change request. Then the processor creates a 12 volt varied output for control of the auxiliary air temperature actuator. When the voltage signal is low a cool air request is made and the voltage signal is high a warm air request is made.