LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 840 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Sealing Washer Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seal washer from the A/C refrigerant component.

    Important:  Cap or tape the open A/C refrigerant components immediately to prevent system contamination.

  2. Inspect the seal washer for signs of damage to help determine the root cause of the failure.
  3. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.

    Important:  DO NOT reuse sealing washer.

  4. Discard the sealing washer.
    Fig 1: Removing Sealing Washer
    G01454200Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals