LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 840 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Expansion (Orifice) Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Recover the refrigerant. Refer to REFRIGERANT RECOVERY AND RECHARGING  .
  2. Loosen the nut from the evaporator tube fitting.
  3. Use the J 26549-E  in order to remove the orifice tube (1) from the evaporator tube (2).
  4. Cap or plug the open line.
    Fig 1: Removing Expansion Tube
    G01454239Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals