LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 838 (Seat System) >> Repair Instructions >> Head Restraint Replacement (Non-Cadillac) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the head restraint (1) into the retainers.
  2. Push the head restraint to the full down position.
  3. Pull up in order to ensure that the head restraint engages with the head restraint retainers (2).
    Fig 1: Installing Head Restraint Into Retainers
    G01459210Courtesy of GENERAL MOTORS CORP.