LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 838 (Seat System) >> Repair Instructions >> Cupholder Replacement - Front Seat >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center seat. Refer to SEAT REPLACEMENT - CENTER  .
    CAUTION: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
  2. Remove the rivets (1) retaining the cupholder from the bottom of the center seat.
  3. Remove the cupholder.
    Fig 1: Removing Rivets Retaining Cupholder
    G01459217Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals