LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 834 (Automatic Transmission - 4L80-E/4L85-E (Service & Replacement)) >> Repair Instructions >> Vent Hose >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Yukon XL, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the vent hose to the transmission.
  2. Install the vent hose to the clip.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the bolt and the clamp.

    Tighten 

    Tighten the bolt to 10 N.m (89 lb in).

    Fig 1: Installing Vent Hose
    G02112287Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals