LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 830 (Transfer Case - BW 4481-Nr3) >> Repair Instructions >> Transfer Case Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Yukon, 2003 Cadillac Escalade EXT, 2003 Cadillac Escalade ESV, and 2003 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transfer case. Refer to TRANSFER CASE ASSEMBLY REPLACEMENT  .

    Important:  It may be necessary to use a sharp punch in order to poke a hole into the seal prior to inserting J 36825  .

  2. Using J 23907  (1), and J 36825  (2), remove the input seal.
    Fig 1: Removing Transfer Case Input Shaft Seal
    G01456440Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals