LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 830 (Transfer Case - BW 4481-Nr3) >> Repair Instructions >> Transfer Case Input Shaft Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Yukon, 2003 Cadillac Escalade EXT, 2003 Cadillac Escalade ESV, and 2003 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using J 42738  , install the input shaft seal.
  2. Install the transfer case. Refer to TRANSFER CASE ASSEMBLY REPLACEMENT  .
    Fig 1: Installing Transfer Case Input Shaft Seal
    G01456441Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals