Test Description
WARNING: This page is about a different car, the 2002 GMC Sonoma and 2002 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
The numbers below refer to the step numbers on the diagnostic procedures.
- 2
If any component diagnostic trouble codes (DTCs) are set, diagnose those DTCs first. A malfunction in a component can cause the converter to appear degraded or may have caused the malfunction. - 3
This step includes inspecting for conditions that can cause the TWC to appear degraded. Repair any problems found before proceeding with this test procedure. - 4
If you need to replace the TWC, make sure that another condition is not present which would cause damage to the converter. Correct any possible causes of converter damage before replacing the TWC in order to avoid damage to the replacement converter.