LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 829 (Rear Drive Axle) >> Repair Instructions >> Drive Side Heel - Coast Side Heel Contact Pattern >> Correction

Drive Side Heel - Coast Side Heel Contact Pattern: Correction

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Decrease the backlash. Move the ring gear closer to the pinion by adjusting the side bearing shim thickness or the adjuster sleeve(s). Refer to BACKLASH ADJUSTMENT (ALL EXCEPT 9.75 INCH AXLE)  or BACKLASH ADJUSTMENT (9.75 INCH AXLE)  .

Fig 1: Drive Side Heel - Coast Side Heel Contact Pattern
G01456275Courtesy of GENERAL MOTORS CORP.